關於QEMU的了解,可以前往Wikipedia查詢
而Qemu最早在OSX上的運用,有分成二個分支在進行
一個是[Q]Project,一個是QemuX,在2005年11月時二個計劃進行合併
這二個計劃共同的目的都在於希望將Qemu發展成一個圖形化的運作環境
目前統一合併在[Q]Project當中,最新的版本是0.8版

官方網址是:http://kberg.ch/q/index.php[Q]project雖然以Qemu為核心技術,但是尚未能全部實現qemu所有功能
例如:win32以外的其他平台尚未能提供模擬功能、硬體USB共享功能尚未完成、雖可安裝Win2K及Win95a,b版,但win98及winxp在安裝過程中會遭遇錯誤而無法正確安裝完成。


[Q]目前已經是Universal Binary,所以intel版本的Mac OSX也可以不需Rosetta轉換在原生環境中使用。

如果你要安裝的是win95系列,最好先找到可開機的DOS image檔
有需要的話可以前往自由軟體技術網的討論中找到下載處

而在此示範的是WINDOWS 2000的安裝方法:

首先請先前往下載Q的主程式,以及熟讀[Q]的說明檔,大略了解以下將會遇到的安裝過程:


1.首先創建一個新的模擬環境,點選工具圖樣進入一般設定畫面,命名以及選擇好分享檔案夾位置,其他部分請依照預設設定勾選即可。


2.進入硬體設定畫面,選擇顯示卡、網路卡及音效卡的模擬裝置,虛擬環境中的硬碟空間可在harddisk選項直接新增即可,在此自己使用的是win2000的iso檔,所以將光碟機的部分指向該檔案,如果沒有轉換成iso檔案也可以直接使用光碟機,只是要變更設定成Built-in-cdrom。


3.此時就進入windows2000的安裝畫面,就可以看到剛剛新設置好的硬碟空間並且進行安裝,安裝過程就都跟安裝一般windows一樣,唯一要注意的是,請將你的PC預設使用者的名稱設置成和你MAC OSX中的使用者名稱相同,以方便後面步驟將來的使用。


4.安裝結束後進入windows畫面


5.正式開始使用windows


6.在預設環境下的安裝結束後,會遇到網路無法使用的問題,之後必須進一步作設定。


7.首先windows2000會將預設網卡改成realtek8029,於是我參考官方說明文件中的[Win95: Installing Networkcard],進入網路設定將網卡改成"Novel/Anthem", select "NE2000 compatible"。


8.再來使用/應用程式/工具程式裡的磁碟工具程式,製作一個空白可讀寫的dmg檔,只要比1.44mb大就可以了,製作好後請將副檔名的.dmg改為.img,因為日後要供虛擬環境當軟碟使用。


9.之後關閉虛擬PC環境,進入[Q]當中虛擬環境的硬體設定,將軟碟位置指向剛才製作好的映像檔。


10.重新啟動WINDOWS環境,開啟[我的電腦]將a磁碟當中的磁片格式化。


11.回到OSX桌面,將剛才製作好給軟碟機使用的映像檔mount出來,可以看到原先的檔案大小已經被格式化成1.44mb。


12.回到[Q]的官方網站下載供給win2k的driver,並將其拷貝至軟碟機使用的映像檔中,之後退出該映像檔。


13.進入a:/磁碟機當中,就可以看到剛才拷貝進去的driver在裡頭,點選進行安裝。


14.安裝過程中會出現請求連接網路磁碟機的畫面,在這裡如果你PC的預設安裝名稱不是和OSX當中的使用者名稱相同的話,就會出現連接錯誤,如果相同的話,就只要輸入OSX使用者帳號的密碼就可以連接上OSX母系統了。


15.如果一開始設置windows環境的使用者名稱與OSX的使用者帳號不同也沒關係,只要開啟隨便一個windows檔案夾,鍵入\\10.0.2.4之後就會開啟一個登入畫面,這時輸入OSX的使用者帳號及密碼就可以透過windows網芳的方式與OSX母系統作溝通了。


16.安裝好[Q]project windows driver之後,也可正常使用OSX的對外網路了。


在intel OSX平台的使用經驗可前往oikos了解
http://www.oikos.com.tw/v4/viewtopic.php?pid=120636#p120636



Technorati Tags:

 

 


Qemu-based [Q] Project/Win32 analog (Win2K installation instruction)


On the understanding of QEMU, you can go to Wikipedia Search 
The Qemu on OSX on the first use of, there is divided into two branches carrying out a yes [Q] Project, one QemuX, in November 2005 when the two plan to merge these two programs are aimed at the common wish to Qemu to develop into a graphical operating environment for the consolidation of the current uniform [Q] Project of them, the latest version is 0.8 version 


Official website is: http://kberg.ch/q/index.php [Q] project although Qemu as the core technology, but have not been able to achieve full qemu all functions such as: win32 platforms other than not been able to provide analog functions, hardware, USB sharing not yet completed, although that can be installed Win2K and Win95a, b Edition However, win98 and winxp during the installation process will encounter an error not properly installed. 


[Q] is now a Universal Binary, so intel version of Mac OSX do not need Rosetta can also convert the native environment. 

If you want to install the win95 series, best to find a bootable DOS image file
If necessary, can go to the free software found in the discussion Technology Network Download Service 

And in this model is the WINDOWS 2000 installation method: 

First, please download the Q to the main program, as well as familiar with the [Q] of the Help file, roughly aware of the following will be encountered in the installation process: 


1. First, create a new simulation environment, click Tools drawings into the General Settings screen name and choose a good shared folder location, other parts of the requests can be checked in accordance with the default settings. 


2. Into the hardware configuration screen, select the display card, network card and sound card, simulator, virtual environment of the hard disk space can be added directly to the harddisk option, in this their own use of the iso is win2000 file, so it's part of the CD-ROM drive to point to the file, if not converted into iso files can also be used directly CD-ROM drive, just to change the settings into the Built-in-cdrom. 


3. At this point enters the windows2000 installation screen, you can see the new settings just a good hard disk space and installation, the installation process is the same as are related to installation of windows in general only to note is that, please make your PC pre - set-based user's name and your MAC OSX users in the same name, in order to facilitate the following steps for future use. 


4. Installed into the windows screen after the end of 


5. The official start using windows 


6. In the default installation of circumstances after the encounter network can not be used, and then it must further be set up. 


7. First, windows2000 will change the default card realtek8029, so I refer to the official documentation in the [Win95: Installing Networkcard], enter the network card settings will change "Novel / Anthem", select "NE2000 compatible". 


8. Again using the / Applications / Utilities inside the Disk Utility, create a blank read-write dmg file, as long as you can more than 1.44mb big, and make good the file name after please. Dmg instead . img, because in future when the floppy disk to be used for the virtual environment. 


9. After the closure of a virtual PC environment, access to [Q] among the virtual environment, hardware configuration, location of the floppy disk image file to point just made good. 


10. Restart WINDOWS environment, open the [My Computer] to a formatted floppy disk among. 


11. Back to the OSX desktop, will have to make good use of floppy disk image file mount up, you can see the original file size has been formatted into a 1.44mb. 


12. Back to [Q] the official website of the Driver win2k download supplies,and copy it to the floppy disk drive using the image file, after the withdrawal from the image file. 


13. Into a: / drive them, you can see just copied into the driver's inside, click to install. 


14. Will appear during the installation process a request to connect a network drive of the screen, where if your PC is not the name of the default installation, and OSX users among the same name, then connection error occurs, if the same words, they are only Enter OSX user account's password can be connected to the mother system of OSX. 


15. If you start setting windows environment, the user name and OSX user account difference is you just need to open a random one windows folder, type \ \ 10.0.2.4 and then will open a login screen, then enter the OSX's user account and password on the network through windows and OSX-fang's way to communicate the master system. 


16. Installed [Q] project windows driver, after normal use can also be the external network of OSX. 


In the intel OSX platform using the experience to understand the oikos 
http://www.oikos.com.tw/v4/viewtopic.php?pid=120636 # p120636

 

 

    全站熱搜

    droger 發表在 痞客邦 留言(0) 人氣()